Sydney Injection Waterproofing
All Remseal technicians are highly trained in all injection services. From crack poly to epoxy, we do it all.
We take full control of the building process and provide the most comprehensive warranty service.
Our services are in accordance with Building code of Australia and the Australian Standards.
Injection repairs are vast in applications & repair methodology. From DPC to crack injection, always must be conducted by a waterproofing specialist that carries the expertise in waterproofing/remediation.
Several repairs must originally be inspected by an engineer (if structural surface), then passed onto a waterproofing specialist enterprise experienced with injection repairs. Several domestic properties suffer from DPC failure (Damp proof Course) due to the age of dwelling or defective installation.
We are certified with Ardex Australia , Tremco Industries, BASF , Cassali, Parchem, & Durotech within installation certifications.
Injection is often the most practical solution to restore the structural and/or waterproofing integrity of your concrete structure. If left untreated, the surface could fail completely, causing moisture incursion, concrete failure, or other catastrophic outcome.
Remseal Epoxy injection is a process whereby epoxy is forced under great pressure into cracks in concrete. When properly performed, the repaired crack is actually stronger than the adjacent concrete, and the integrity of the surface is restored. The injection process is also utilized when water flows through cracks in buildings, especially in below-grade situations where access to the exterior of the surface is not practical. By injecting the crack with epoxy, not only is the integrity of the concrete restored, but also the water penetration is eliminated.
Chemical grout injection is utilized when water penetrates a surface, but not necessarily via identifiable cracks, or when there are so many cracks that injecting each one individually is not cost effective. Using this procedure, an expanding waterproofing grout is injected through a wall surface, to the back (exterior) side of the surface. When the chemical grout encounters water or moisture, it expands to many times its original size. This grout can lay dormant for extended periods, in an “un-activated” state until it encounters water.
Remseal Waterproofing uses only the highest grade injection epoxies and chemical grouts available.
Call us (02) 81193927, and schedule a consultation with the professional.
Enquire for Injection Waterproofing